Fanuc Symbol CAPi T Operators Manual

Y–AXIS FAPT FUNCTION
B–63304EN/02
7. NC MACHINE TOOL FILE (MTF)
590
NOTE
1 Data is referenced at the beginning of Yaxis machining.
If two or more Yaxis machining processes are defined
continuously, the data is not referenced for the second or
subsequent processes.
2 The data is referenced at the beginning of a turning process.
If two or more turning processes are defined continuously,
the data is not referenced for the second or subsequent
processes.
3 The data is referenced at the beginning of a milling process.
If two or more milling processes are defined continuously,
the data is not referenced for the second or subsequent
processes. The milling process can be a Caxis machining
process or Yaxis machining process.
c. Function codes
High–order
three digits
Low–order
one digit
Function Remarks
2 2 0 1
3rd axis output (Y axis) Address specified in
MTF1048
5 5 0 1
3rd axis auxiliary output
(circular center Y axis)
Address specified in
MTF1049
E E 0 1
Output of V0 Output when approach
or retraction is
simultaneously
performed along two
axes or when
movement is performed
along the Yaxis only
2 0 0 7
Output of Y0 Address of the first
character in MTF1048
2 1 0 7
Output of Y0 Address of the second
character in MTF1048
5 0 0 7
Output of J0 Address of the first
character in MTF1049
5 1 0 7
Output of J0 Address of the second
character in MTF1049

Leave a Reply

Your email address will not be published. Required fields are marked *