Fanuc Symbol CAPi T Operators Manual

Y–AXIS FAPT FUNCTION
B–63304EN/02
7. NC MACHINE TOOL FILE (MTF)
592
Point to be
referenced
Description
Parameter
No.
(4) Approach
Servo motor control method
First movement
from the
tool–change
point, coolant
on
2018
or
2031
2032
Simultaneous approach along four axes
Simultaneous approach along one, two, or
three axes
The number of axes along which
movement is performed is determined
by bits 3 and 4 of system parameters
400 to 404.
Spindle positioning method
2031
2032
2211
Simultaneous approach along one, two, or
three axes (Warning 1) (Warning 2)
Specifying spindle indexing (Warning 3)
(5) to (9)
Command of
When bit 1 of MTF1304 is set to 0 (canned drilling cycle
is not used)
linear
movement or
Servo motor control method
rotation
2017 Specifying rapid traverse or cutting feed
(linear movement or rotation)
Spindle positioning method
2017
2211
Specifying rapid traverse or cutting feed
(linear movement)
Specifying spindle indexing
When bit 1 of MTF1304 is set to 1 (canned drilling cycle
is used)
Servo motor control method
2203
to
2206
Specifying a canned drilling cycle
(linear movement or rotation)
Spindle positioning method
2203
to
2206
2211
Specifying a canned drilling cycle
(linear movement)
Specifying spindle indexing
WARNING
1 Specify whether the approach is simultaneously performed
along one, two, or three axes.
2 Do not specify the function code of AA01 (Caxis move
command).
3A Caxis move command is executed.

Leave a Reply

Your email address will not be published. Required fields are marked *