7. NC MACHINE TOOL FILE (MTF)Y–AXIS FAPT FUNCTION
1 The data is not referenced for the second or subsequent
process of continuous (C–axis/Y–axis) milling processes.
2 The data is not referenced for the second or subsequent
process of continuous Y–axis processes.
Point to be
point, coolant off
Simultaneous escape along three axes
Simultaneous escape along one or two
The number of axes along which the
movement is performed is determined
by bits 5 and 6 of system parameters
400 to 404.
(End of the
End part of the process:
2082 for a drilling process
³ machine zero
2017 Movement to the home position
(end of the
2001 Trailing section
Spindle stop, tool offset cancel, program