Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
2. SPECIFICATIONSBACK MACHINING FAPT
619
(NC machine file: CNC specification)
No. Format Initial value Description
1086 Integer 1 Output format for data for tool post 2
1: Usual output format
1: Output format used when the Caxis origin for tool post 2 is 180 degrees
opposite to the origin for tool post 1.
D The sign of Xaxis values for tool post 2 is inverted before being output.
D The sign of Xaxis and Caxis values that are undergoing polar
coordinate conversion for tool post 2 is inverted before being output.
To the contrary, the expression angle = 180 angle is used in foreground
animated simulation.
(5)MTF related to the spindle rotation M code for a rotation tool on tool
path 2
Specify the M code related to spindle rotation (normal, reverse, or
stop) for a rotation tool on tool post 2, using three digits.
(NC machine file: CNC specification)
No. Format Initial value Description
1417 Three
characters
–1 M code for tool spindle (normal rotation) on tool post 2
1417 Three
characters
–1 M code for tool spindle (reverse rotation) on tool post 2
NOTE
If MTF1417 = 1, the M code set up for tool post 2 is equal
to the M code set up for tool post 1.
2 (rear end face) can be designated as mounting direction of tool data for
milling (CP).
CP = _ (1: SIDE, 1: FRONT FACE, 2: REAR FACE)
In this case, tool information 2 in tool data (FLAG2) means as follows:
#7 #6 #5 #4 #3 #2 #1 #0
Bit 0 Rotation direction (TR)
0 : Positive rotation
1 : Inverse rotation
Bit 1, 2 Mounting direction (CP)
00: Side
01: Front face
11: Rear face
2.2.3
Tool Data

Leave a Reply

Your email address will not be published. Required fields are marked *