Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
1. OUTLINE
AUTOMATIC PROCESS
DETERMINATION FUNCTION
625
1
OUTLINE
WARNING
For those machining processes that have been
automatically created, check the machining sequence. If
the machining sequence is invalid, the tool may collide with
the workpiece and/or machine, or forced machining may
occur, possibly causing damage to the machine or tool itself,
or injury to the user.
The automatic process determination function enables the operator to
create NC data by simply entering the material figure and part figure and
pressing soft keys.
This function eliminates or greatly reduces the number of data entering
operations for menu item 4 (machining definition).
This function uses tooling information, tool data, and setting data. Set
these data before using this function.
The following processes can be specified using the automatic process
determination function:
1) Turning process
Center drilling
Drilling
Outer surface roughing
Inner surface roughing
Outer surface semifinishing
Inner surface semifinishing
Outer surface finishing
Inner surface finishing
Grooving or residual machining
Cutting–off (B option for the automatic process determination
function)
Threading
Bar feeding (B option for the automatic process determination
function)
2) C–axis process
C–axis center drilling
C–axis drilling
C–axis tapping
C–axis grooving
Face milling
Cylindrical grooving

Leave a Reply

Your email address will not be published. Required fields are marked *