Fanuc Symbol CAPi T Operators Manual

AUTOMATIC PROCESS
DETERMINATION FUNCTION
B–63304EN/02
3. SETTING THE MACHINING
PROCEDURE
632
The function of each soft key is as follows:
ESCAPE: Returns to the execution procedure menu for FAPT.
REGST.: Registers the set data in submemory.
INSERT: Inserts a process immediately before the process
pointed to by the cursor. Pressing this soft key
displays the soft key menu for selecting a process.
PROC. DELETE: Deletes the process pointed to by the cursor.
MANUAL FLAG: Displays the soft key menu for setting the manual
input flag for the process pointed to by the cursor.
ORIGIN PROC.: Restores the data for the edited group (returns the data
to the state before editing).
CURSOR°: Moves the cursor to delete or insert a process.
CURSOR±: Moves the cursor to delete or insert a process.
SELECT GROUP:Selects the machining method group (1 to 3).
EXEC: Starts automatic process determination.
(1)Changing the machining method group
Pressing the SELECT GROUP soft key switches the machining
method group from 1 to 2, 2 to 3, or 3 to 1.
(2)Inserting a process
Move the cursor to the desired position using the CURSOR ° or
CURSOR ± soft key and press the INSERT soft key. The soft keys for
selecting the process type are displayed.
Pressing the [+] soft key displays other process type soft keys.
Pressing the soft key for the desired process type inserts the new
process immediately before the process pointed to by the cursor.
Pressing the
soft key exits the insert mode and returns the display
to the first soft key menu.

Leave a Reply

Your email address will not be published. Required fields are marked *