Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
4. DETAILS OF AUTOMATIC
PROCESS DETERMINATION
AND NOTES ON ITS USE
AUTOMATIC PROCESS
DETERMINATION FUNCTION
653
When the conditions in Fig.9 are satisfied
Process 02 Drilling
Drills area (2) in Fig.10.
ã
Fig. 10
When the conditions in Fig.9 are not satisfied
Drilling is not performed.
ã
Fig. 11
Checks setting data Nos.52 and 53 for the third area to be drilled.
Value in No.52 < d
Value in No.53 <
1
D
Fig. 12
No.52 (minimum allowance for drilling)
No.53 (minimum length–to–diameter ratio of the inner surface to be
drilled)

Leave a Reply

Your email address will not be published. Required fields are marked *