4. DETAILS OF AUTOMATIC
AND NOTES ON ITS USE
When the conditions in Fig.12 are satisfied When the conditions in Fig.12 are not satisfied
Process 03 Drilling
Drills area (3) in Fig.13.
Drilling is not performed.
Fig. 13 Fig. 14
Process 04 Inner surface machining Process 02 Inner surface machining
Fig. 15 Fig. 16
(2)When the value in No.50 is larger than the value in No.51
No.50 (maximum inner diameter
which can be machined with the inner surface tool)
No.51 (minimum inner diameter
which can be machined with drills)