Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
4. DETAILS OF AUTOMATIC
PROCESS DETERMINATION
AND NOTES ON ITS USE
AUTOMATIC PROCESS
DETERMINATION FUNCTION
655
When setting data Nos.50 and 51 are set as shown in Fig.17, the following
processes are created:
Checks the conditions shown in Fig. 9 for the second area to be drilled.
When the conditions in Fig. 9 are satisfied When the conditions in Fig. 9 are not satisfied
Process 03 Inner surface machining Process 02 Inner surface machining
Process 01 Drilling
Drills area (1) in Fig.18.
Uncut area
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22

Leave a Reply

Your email address will not be published. Required fields are marked *