Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
3. EXECUTION OF
Symbolic FAPT
PROGRAMMING AND
OPERATION BY Symbolic FAPT
49
(b)DIRECTION DN = Direction of grooving. . . . . . . . . . .
Press the corresponding element
symbol key (° ± ³ ²).
(c) WIDTH WT = Distance between the . . . . . . . . . . . . . . .
shoulders of the groove
(d)DEPTH DT = Depth of the groove. . . . . . . . . . . . . . .
CAUTION
If the line along which the width or depth of the groove is
measured is parallel to the Xaxis (° or ±), specify the width
or depth with a radius.
(e) R/C OF CORNER
1–ST KC = CV =. . . .
2–ND KC = CV =. . . .
3–RD KC = CV =. . . .
4–TH KC = CV =. . . .
Specify the figures of the groove corners in the order in which they
are defined.

Leave a Reply

Your email address will not be published. Required fields are marked *