DOUBLE SIDED MACHINING
5. PROCESSING DEFINITION
The definition of the First processing side is as it is. In the definition of
the Secondary processing side, blank figure and the part figure draw in
shape that the reverse to X axis symmetry for draw on the First processing
side. Definition method on the Secondary processing side is shown as
follows. When the “
” part part finishes defining for First processing.
(Refer to Fig. 5.2 (a))
The process list screen is displayed as shown in Fig. 5.2 (b).
Fig. 5.2 (a)
Fig. 5.2 (b)
It will change into soft key like the under figure, if softkey “³” of a right
edge is pushed.
Fig. 5.2 (c)