5. PROCESSING DEFINITIONDOUBLE SIDED MACHINING
For those machining processes that have been
automatically created, check the machining sequence. If
the machining sequence is invalid, the tool may collide with
the workpiece and/or machine, or forced machining may
occur, possibly causing damage to the machine or tool itself,
or injury to the user.
First of all, the cutting area of the First processing and Secondary
processing are divided. Next time, the process for the First processing is
decided automatically according to the processing procedure data. The
process on a Secondary side is continuously decided.
When soft key “AUTO PROC” is pushed, on the “kinds of machining”
screen, the screen is switched to decide the first and second processing
area used for automatic process definition function.
Fig. 5.3.1 (a)