Fanuc Symbol CAPi T Operators Manual

ANIMATED SIMULATION FUNCTION B
B–63304EN/02
1. ANIMATED SIMULATION
FUNCTION B
712
The ANIMATED SIMULATION FUNCTION B provides another view
of the animated simulation for the CAP II system with C–AXIS FAPT
function.Selecting Menu 6[Machining Simulation] in the Main
menu,X–Z side view of the turning simulation or the C–Axis machining
simulation is drawn on left half of the screen,and X–C front view of the
C–Axis machining simulation is drawn on right half of the screen.This
new simulation function is named as ANIMATED SIMULATION
FUNCTION B in contrast with the conventional isometric C–Axis
simulation which is now renamed as ANIMATED SIMULATION
FUNCTION A.
Whether to use ANIMATED SIMULATION FUNCTION A or
ANIMATED SIMULATION FUNCTION B is switched by a system
parameter.
The ANIMATED SIMULATION FUNCTION option and C–Axis FAPT
FUNCTION option are required to utilize this function.VERTICAL
LATHE ANIMATION FUNCTION option is also required if the
animated simulation is desired to be drawn vertically on the screen.
ANIMATED SIMULATION FUNCTION B is available for following
products.
FS16/18–TC CAPII, FS16/18i–TA CAP II
When Menu 6 is selected, both X–Z side view and X–C front view of the
work is drawn on the screen,if C–axis machining figure is defined for the
work. Side view of the blank is drawn on left half of the screen and front
view of the blank is drawn on right half of the screen,including C–axis
machining figure defined in Menu 2 [Input of Part Figure]. Both blank
figures are painted with specified color in the same manner as
conventional animation function. Regarding the color of the C–axis
machined figure, refer to the section 2.3 System Parameter. These pictures
are drawn in appropriate size by automatically adjusting the
magnification factor so that each blank figure fits in corresponding half
of the screen.
In case C–axis machining figure is not defined for the work, only X–Z
side view of the work is drawn on full screen.
1.1
SPECIFICATIONS
1.1.1
Availability
1.1.2
Screen View of Menu 6

Leave a Reply

Your email address will not be published. Required fields are marked *