Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
1. ANIMATED SIMULATION
FUNCTION B
ANIMATED SIMULATION FUNCTION B
717
No. Format Initial value Description
0019 0, 1
designation
(8 bits)
00000000 Select horizontal or vertical drawing format
for the drawings of:
Bit 0 Menu 4, 5, and 6. or (Note)
Bit 1 Menu 1, 2, 4, 5 and 6..
0: Horizontal Drawing
1: Vertical Drawing
0552 Integer 1 (RED) Color of lines which indicate outline of a
part machined by turning process.
0590 Integer 6
(Light Blue)
Color of lines which indicate outline of a
part machined by Caxis machining.
0701 0, 1
designation
(8 bits)
00000000 Bit 0 Select Animated Simulation
Function A or B
0: Animated Simulation Function A
1: Animated Simulation Function B
0705 0, 1
designation
(8 bits)
00000000 Bit 1 Turret placement during 2–path
lathe simulation
0: Place turret 1 in upper side of the
screen.
1: Place turret 1 in lower side of the
screen.
NOTE
ANIMATED SIMULATION FUNCTION for VERTICAL
LATHE” option is required if the animated simulation of
Menu 6 is desired to be drawn vertically on the screen.
1.3
PARAMETERS
1.3.1
System Parameter

Leave a Reply

Your email address will not be published. Required fields are marked *