Fanuc Symbol CAPi T Operators Manual

Symbol CAPi T
B–63304EN/02
2. DESCRIPTION OF OPERATIONS
724
D Setting bit 0 of system parameter No. 801 to 0 enables screen displays
with background colors and 3D soft keys. This is referred to as
background color mode. When using this mode, set bit 7 of NC
parameter No. 3119 to 0 so that NC screen displays are also provided
with background colors.
D Setting bit 0 of system parameter No. 801 to 1 does not enable screen
displays with background colors and 3D soft keys. This is referred to
as plain mode. When using this mode, set bit 7 of NC parameter No.
3119 to 1 so that NC screens are also not displayed with background
colors.
D If you switch the screen mode using bit 0 of system parameter No. 801,
re–set the system parameters related to color data and displays so that
the screen is easy to read.
D See Section 2.4, “Coloring Data Setting Initialization” for an
explanation of how to change all the color settings at the same time.
You can select a desired color pattern from the three different coloring
patterns on the initial screen using soft keys.
Fig. 2.2 Initial screen
If bit 1 of system parameter No. 801 is set to 1, the following soft keys
are displayed and can be used to select a coloring pattern.
[COLOR1 SELECT] Selects coloring pattern 1.. . . .
[COLOR2 SELECT] Selects coloring pattern 2.. . . .
[COLOR3 SELECT] Selects coloring pattern 3.. . . .
2.1
DISPLAYING
SCREENS WITH
BACKGROUND
COLOR
2.2
SELECTING COLOR
PATTERNS

Leave a Reply

Your email address will not be published. Required fields are marked *