Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
2. DESCRIPTION OF OPERATIONS
Symbol CAPi T
725
D Three coloring patterns can be specified on the coloring setting screen.
D Each of the three coloring patterns has containers (hereafter called
palettes) for 15 character colors and 15 graphics colors.
D The color on any palette can be changed.
D System parameter Nos. 500 to 699 specify the location where each
palette is used.
D Each palette has a fixed use. Use caution when selecting a palette.
D Coloring data (generic name of data specified in three different
coloring patterns) can be input and output by setting system data and
using the input/output screen.
D Coloring data is held only in submemory. No copy of it is held in main
memory.
The uses of the coloring data listed below are fixed. They cannot be
changed, even with the system parameters for setting color displays.
Character coloring data
Table 2.3.1 (a)
Palette
number
Fixed use
Standard
color
0 D Background color for animation windows displayed on
the NC data creation screen and machining simulation
screen
D Portion representing shadow of a recessed display
D Registered character color 1 (soft key frame)
Note) The color on the palette cannot be changed.
Black
1 D Character color for animation windows displayed on
the NC data creation screen and machining simulation
screen
D Animated tool/holder display color (animation with
gradation)
D C/Y animation 3D tool path color (animation with
gradation)
Pale red
2 D Character color for animation windows displayed on
the NC data creation screen and machining simulation
screen
D Registered character color 2 (portion representing
shadow of a recessed soft key)
Dark gray
3 D Character color for animation windows displayed on
the NC data creation screen and machining simulation
screen
D Background color for prompt input windows
D Registered character color 3 (background color for an
animation window displayed in the soft key frame)
D C/Y animation 3D tool path color (animation with
gradation)
Gray 1
4 D Character color for animation windows displayed on
the NC data creation screen and machining simulation
screen
D Background color for soft keys and NC status displays
D Registered character color 4 (background color of soft
key display in the soft key frame)
Gray 2
2.3
COLORING DATA
SETTING
2.3.1
Fixed Use of Coloring
Data

Leave a Reply

Your email address will not be published. Required fields are marked *