Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
2. DESCRIPTION OF OPERATIONS
Symbol CAPi T
729
The following operations can be performed by pressing the respective soft
keys listed below.
[CURSOR ° ± ] Selects the number of the palette in which a color. . .
on which is to be changed.
[RED+] Increases the degree of redness. (NOTE 1). . . . . . . . . .
[RED–] Decreases the degree of redness.. . . . . . . . . .
[GREEN+] Increases the degree of greenness.. . . . . . .
[GREEN–] Decreases the degree of greenness.. . . . . . .
[BLUE+] Increases the degree of blueness.. . . . . . . .
[BLUE–] Decreases the degree of blueness.. . . . . . . .
[GRPC. COLOR] Switches to the graphics color setting screen.. .
(NOTE 2)
[CHAR. COLOR] Switches to the character color setting screen..
[END] Returns to the SYSTEM DATA SETTING &. . . . . . . . . . .
OUTPUT/INPUT” menu.
Pressing the rightmost soft key [+] changes the soft key displays as shown
below:
[+]
[COLOR1 COPY] Copies the data of coloring pattern 1 to the. . . .
selected coloring pattern.
[COLOR2 COPY] Copies the data of coloring pattern 2 to the. . . .
selected coloring pattern.
[COLOR3 COPY] Copies the data of coloring pattern 3 to the. . . .
selected coloring pattern. (NOTE 3, 5)
[COLOR1 SELECT] Selects coloring pattern 1 as the coloring. .
pattern to be displayed and set.
[COLOR2 SELECT] Selects coloring pattern 2 as the coloring. .
pattern to be displayed and set.
[COLOR3 SELECT] Selects coloring pattern 3 as the coloring. .
pattern to be displayed and set. (NOTE 4, 5)

Leave a Reply

Your email address will not be published. Required fields are marked *