Fanuc Symbol CAPi T Operators Manual

Symbol CAPi T
B–63304EN/02
2. DESCRIPTION OF OPERATIONS
730
NOTE
1 The range that can be specified for the gradation tone is 0
to 15; the higher the number, the greater the illuminance.
2 Either the [GRPC. COLOR] or [CHAR. COLOR] soft key is
displayed depending on the type of the current coloring data
setting screen.
3 When a coloring pattern is copied, the color of the displays
changes immediately, as specified in the copy source
coloring data.
4 When the coloring pattern is switched, the color of the
displays changes immediately, as specified in the selected
coloring pattern.
5 For both character and graphics coloring patterns, the data
corresponding to the specified number is copied or
selected.
The specified coloring data can be output to an external device and
subsequently input again.
(1)Press soft key [DATA SETTING] on the Symbol CAPi T initial
screen.
(2)Select “1. SYSTEM DATA SETTING & OUTPUT/INPUT.
(3)To output the coloring data, select 22. COLORING DATA
OUTPUT.” To input the coloring data, select 23. COLORING DATA
INPUT.”
Fig. 2.3.3 System parameter setting and input/output screen
D The detail input/output operations for this system data are the same as
those for other system data. See Section 2, INPUT/OUTPUT AND
COLLATION OF DATA.
D If coloring data is input from an external device, the coloring data and
displays are switched accordingly.
2.3.3
Coloring Data
Input/Output

Leave a Reply

Your email address will not be published. Required fields are marked *