Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
2. DESCRIPTION OF OPERATIONS
Symbol CAPi T
731
If the power is switched on with the “SP” key held down, the coloring data
for [COLOR1] to [COLOR3] is set using the FANUC standard values for
background color mode, and the coloring pattern for [COLOR1] is
selected.
If other than the correct coloring is specified, the display on the screen
may become impossible to read. To overcome this, switch on the power
while holding down the “P” key. The coloring data for [COLOR1] to
[COLOR3] is set using the FANUC standard values for background color
mode, and the coloring pattern for [COLOR1] is selected.
2.4
COLORING DATA
SETTING
INITIALIZATION
2.4.1
“SP” Key
2.4.2
“P” Key

Leave a Reply

Your email address will not be published. Required fields are marked *