Fanuc Symbol CAPi T Operators Manual

Symbol CAPi T
B–63304EN/02
2. DESCRIPTION OF OPERATIONS
732
(1)CFINT
If submemory initialization CFINT is performed, the coloring data for
[COLOR1] to [COLOR3] is set using the FANUC standard values for
background color mode, and the coloring pattern for [COLOR1] is
selected.
(2)NEWCOLOR/OLDCOLOR
All the initial values of the system parameters related to color displays
and coloring data can be set to the FANUC standard values for the
background color or plain mode at the same time.
1 Press soft key [AUXILIARY] on the Symbol CAPi T initial screen.
2 Respond to the prompt Request = with either of the following
commands.
NEWCOLOR: D Resets bit 0 of system parameter No. 801 to 0
(background color mode).
D Initializes the system parameters related to color
displays and coloring data to the FANUC standard
values for background color mode.
OLDCOLOR: D Sets bit 0 of system parameter No. 801 to 1 (plain
mode).
D Initializes the system parameters related to color
displays and coloring data to the FANUC standard
values for plain mode.
NOTE
These commands save all the system parameters from
main memory to submemory.
Fig. 2.4.3 Screen with no background color or No 3D soft keys
(conventional screen)
3 When these commands are executed, the message PLEASE TURN
OFF POWER appears on the screen. Switch the power off and on
again.
2.4.3
Auxiliary Commands

Leave a Reply

Your email address will not be published. Required fields are marked *