Fanuc Symbol CAPi T Operators Manual

Symbol CAPi T
B–63304EN/02
3. SYSTEM PARAMETERS
736
Table 3 (b) Color display system parameters
Parameter
No.
Coloring
data type
Standard
value
Details
500 Graphic 4 Fixed screen for drawing type setting
501 Graphic 4 Fixed screen for blank figure and basic line setting
502 3 Not used
550 Graphic 0 Coordinate axis
551 Graphic 2 Line showing blank figures
552 Graphic 1 Line showing machining profiles
553 Graphic 7 Threading area for machining definitions with menu No. 4
554 Graphic 4 Center drilling path
555 Graphic 4 Drilling, reaming, and tapping path
556 Graphic 2 Outer surface rough machining path
557 Graphic 2 Inner surface rough machining path
558 Graphic 2 Outer surface semifinish machining path
559 Graphic 2 Inner surface semifinish machining path
560 Graphic 6 Outer surface finishing path
561 Graphic 6 Inner surface finishing path
562 Graphic 5 Grooving/necking path
563 Graphic 3 Threading path
570 Graphic 2 Y–axis machining path (center drilling)
571 Graphic 2 Y–axis machining path (drilling)
572 Graphic 2 Y–axis machining path (tapping)
573 Graphic 2 Y–axis machining path (pattern machining)
574 Graphic 2 Y–axis machining path (contour machining)
575 to 578 Undefined Not used
579 Graphic 6 Parts figure for Yaxis machining
580 Graphic 2 C–axis machining path (center drilling)
581 Graphic 2 C–axis machining path (drilling)
582 Graphic 2 C–axis machining path (tapping)
583 Graphic 2 C–axis machining path (grooving)
584 Graphic 2 C–axis machining path (notching)
585 Graphic 2 C–axis machining path (cylindrical grooving)
586 Graphic 0 Line showing onhold machining profile (onhold mode
587 to 589 Undefined Not used

Leave a Reply

Your email address will not be published. Required fields are marked *