Fanuc Symbol CAPi T Operators Manual

SLANTED SURFACE MACHINING
B–63304EN/02
1. OVERVIEW
772
Slanted surface machining can be programmed for the following machine
configuration:
Spindle: Main spindle only, or main spindle + subspindle
Tool post: ATC type or turret type tool post (one path)
Note) Two–path machines (those having two tool posts) are not
supported.
Controlled axes: X, Z, C, Y, β (the βaxis is for tilting the tool.)
NOTE
In slanted surface machining, only positioning can be
performed for the tool angular axis and Caxis. The
following machining types, in which the tool angular axis
and Caxis are controlled, are not supported.
D Machining in which the tool axis is always kept facing in
the normal direction.
D End face machining, cylindricalsurface grooving, polar
coordinate interpolation machining, and cylindrical
interpolation machining which are performed by tilting
the tool axis.
1.1
SUPPORTED
MACHINE
CONFIGURATIONS

Leave a Reply

Your email address will not be published. Required fields are marked *