Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
6. ANIMATED SIMULATION
(MENU NO. 6)
SLANTED SURFACE MACHINING
799
(Example of setting)
MTF1420 = 30190 /* M30190 tool attitude 1 B = 90 */
MTF1421 = 30100 /* M30100 tool attitude 2 B = 0 */
MTF1422 = 30090 /* M30090 tool attitude 3 B = 90 */
MTF1423 = 30000 /* M30000 tool attitude 1 I = 0 */
MTF1424 = 31000 /* M31000 tool attitude 2 I = 1 */
NOTE
1 Two M codes (one for tool attitude and the other for turning
tool orientation) listed above are output according to the
desired attitude and orientation of the tool.
2 For lathe turning drilling and milling tools, no M code for
turning tool orientation need be output.
3 For slanted surface machining, the M code for tool attitude
2 must be output.

Leave a Reply

Your email address will not be published. Required fields are marked *