OPERATION BY Symbolic FAPT
3. EXECUTION OF
When the rightmost soft key [+] is pressed,
the following soft keys are displayed:
If the CHAMFER soft key is pressed, the yellow cursor blinks at a
corner of the machining profile whose chamfering data has not yet
At the same time, the question for the chamfering amount C and
surface roughness SR is displayed.
C = Input the chamfering amount.
SR = Input the number of
marks showing the surface
When the control asks, input the chamfering amount and surface
After keying in a required numeral, press [EXEC] soft key. Then,
chamfering is applied to the lighting corner, and the initial screen is