Fanuc Symbol CAPi T Operators Manual

SLANTED SURFACE MACHINING
B–63304EN/02
8. NC MACHINE FILES (MTF)
804
No. DescriptionInitial valueFormat
1031 Integer
3 mm specification
Number of decimal places in the least input increment for the
4 inch specification
rotation center axis orientation (Xaxis) in three–dimensional
coordinate conversion
1032 Integer
3 mm specification
Number of decimal places in the least input increment for the
4 inch specification
rotation center axis orientation (Yaxis) in three–dimensional
coordinate conversion
1087 Bit 00000100 Bit 0 Specify the output format for the Zaxis sign for secondspindle data as
follows:
0: The Zaxis sign for secondspindle data is not inverted.
1: The Zaxis sign for secondspindle data is inverted before being
output.
Bit 1 Specify the output format for the sign of the tool angular axis angle, as
follows:
0: The sign of the tool angular axis angle is not inverted before being
output.
1: The sign of the tool angular axis angle is inverted before being output.
Bit 2 Specify the output format for the sign of the rotation angle in
three–dimensional coordinate conversion, as follows:
0: The sign of the rotation angle is not inverted before being output.
1: The sign of the rotation angle is inverted before being output.
Bit 3 Specify the output format for the sign of the rotation angle for the second
spindle in threedimensional coordinate conversion, as follows:
0: The sign of the rotation angle for the second spindle is not inverted
before being output.
1: The sign of the rotation angle for the second spindle is inverted before
being output.
Bit 4 Specify the timing when threedimensional coordinate conversion is to be
canceled, as follows:
0: A cancel command is output after the tool reaches the tool–change
position.
1: A cancel command is output just before the tool reaches the
tool–change position.
1125 Real number 0 The value set in this parameter is added to the tool angular axis angle before output.
(NC machine file: G code output format)
No. Format Initial value Description
1385 Real number 68.1 G code for starting threedimensional coordinate conversion
1386 Real number 69.1 G code for canceling threedimensional coordinate conversion
(NC machine file: Address output format)
No. Format Initial value Description
1040 2 Character ZW Address for the rotation center (Zaxis) in threedimensional coordinate
conversion
1041 2 Character XU Address for the rotation center (Xaxis) in threedimensional coordinate
conversion
1048 2 Character YV Address for the rotation center (Yaxis) in threedimensional coordinate
conversion
1042 2 Character KK Address for the rotation center axis orientation (Zaxis) in three–dimensional
coordinate conversion

Leave a Reply

Your email address will not be published. Required fields are marked *