Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
8. NC MACHINE FILES (MTF)SLANTED SURFACE MACHINING
805
No. DescriptionInitial valueFormat
1043 2 Character II Address for the rotation center axis orientation (Xaxis) in three–dimensional
coordinate conversion
1049 2 Character JJ Address for the rotation center axis orientation (Yaxis) in three–dimensional
coordinate conversion
1404 2 Character RR Address for the rotation angle in threedimensional coordinate conversion
1405 2 Character BB Address for the tool angular axis angle
1406 2 Character HH Address for the spindle number
1407 2 Character II Address for the turning tool clamp type
(NC machine file: M code output format)
No. Format Initial value Description
1420 5 Character –1 Tool attitude 1 M code (for foreground animated simulation)
1421 5 Character –1 Tool attitude 2 M code (for foreground animated simulation)
1422 5 Character –1 Tool attitude 3 M code (for foreground animated simulation)
1423 5 Character –1 Turning tool orientation 1 M code (for foreground animated simulation)
1424 5 Character –1 Turning tool orientation 2 M code (for foreground animated simulation)
NOTE
The range of the M code values that can be entered is from
0 to 65535.
(NC machine file: Function table)
No. Meaning Remarks
2019 Outputting escape command (for Yaxis) for simultaneous move-
ment with respect to the three axes
G30 U0. W0. V0.
2252 Starting threedimensional coordinate conversion G68.1 Xx Yy Zz Ii Jj Kk Rr
2253 Canceling threedimensional coordinate conversion G69.1
2254 Outputting T code for tool selection G0 Txxxx
2255 Starting lathe turning process G700 Hh M17 Bb Ii
2256 Starting milling process G700 Hh M18 Bb

Leave a Reply

Your email address will not be published. Required fields are marked *