Fanuc Symbol CAPi T Operators Manual

APPENDIX
B–63304EN/02
A. SETTING DATA,
SYSTEM PARAMETER, MTF
824
Parameter
No.
RemarksDescription
Initial
value
Format
0158 Real number
3000. mm specification
Feed rate (F2) for positioning on the work
120. inch specification
by bar feed.
Unit: mm/min or inch/min
0159 Real number
1000. mm specification
Feed rate (F3) of tool after positioning on
40. inch specification
the work by bar feed.
Unit: mm/min or inch/min
0160 Real number 3. Dwell time when the chuck is opened or closed in bar feed.
(Second)
0170 Real number
2. mm specification
Cutting depth per cut of machining a
0.08 inch specification
groove by the pecking motion D
Unit: mm or inch
0171 Real number
1. mm specification
Return relief amount during machining of a
0.04 inch specification
groove by the pecking motion U
Unit: mm or inch
0172 Real number
0.5 mm specification
Z–axis finishing allowance at roughing
0.02 inch specification
Unit: mm or inch
0173 Real number
0.1 mm specification
Z–axis allowance at intermediate finishing
0.004 inch specification
Unit: mm or inch
0174 Real number 0.7578 Constant for obtaining the depth of a thread from the pitch of
outer surface threading
(Depth) = (pitch) (parameter No.174)
0175 to
0179
Real number Undefined Can’t use. (Dont change the data.)
0180 Real number
2. mm specification
Clearance amount of center drilling C
0.08 inch specification
Unit: mm or inch
0181 Real number
2. mm specification
Clearance amount of Drilling (machining
0.08 inch specification
methods 1, 2, and 3) C.
Unit: mm or inch
0182 Real number
2. mm specification
Secondary clearance amount of drilling
0.08 inch specification
(machining method 3) C1.
Unit: mm or inch
0183 Real number
2. mm specification
Clearance amount of roughing in the
0.08 inch specification
X–axis direction CX
Unit: mm or inch
0184 Real number
2. mm specification
Clearance amount of roughing in the
0.08 inch specification
Z–axis direction CZ
Unit: mm or inch
0185 Real number
2. mm specification
Clearance amount of semifinishing in the
0.08 inch specification
X–axis direction CX.
Unit: mm or inch

Leave a Reply

Your email address will not be published. Required fields are marked *