Fanuc Symbol CAPi T Operators Manual

APPENDIX
B–63304EN/02
A. SETTING DATA,
SYSTEM PARAMETER, MTF
840
Parameter
No.
RemarksDescription
Initial
value
Format
0743 Integer Undefined M code number for the start of Yaxis machining (switching to
the Yaxis animated simulation screen)
Only for the
5900 and
5F00
systems
0744 to
0748
Integer Undefined Can’t use. (Dont change the data.)
0749 Integer Undefined M code number (for the second spindle) starting
Y–axis/side–surface animated simulation
0750 Real number 1 Graphic scale constant
Parameters
0751 Real number
3. mm specification
Tip width of the drilling tool.
for
animated
0.1 inch specification
Unit: mm or inch
drawing
0752 Real number
3. mm specification
Tip width of the grooving tool.
0.1 inch specification
Unit: mm or inch
0753 Real number
2. mm specification
Tip width of the threading tool.
0.08 inch specification
Unit: mm or inch
0754 Real number
5. mm specification
Tip width of the generalpurpose tool.
0.2 inch specification
Unit: mm or inch
0755 Real number
0.2 mm specification
Initial value of the fine chamfering amount.
0.008 inch specification
Unit: mm or inch
0756 Real number 120. Max. angle in which fine chamferring is performed. (Setting
range 0°< Angle to 180°), Unit: deg.
0757 Real number 1.5 Delay amount of tool 2 with respect to tool 1 during balance
cutting (type B), Unit: rev
TT only
0758,
0759
0, 1
designation (8 bits)
Undefined Can’t use. (Dont change the data.)
0760 Real number Undefined Minimum slanted surface angle
0761 Real number Undefined Maximum slanted surface angle
0762 to
0768
0, 1
designation (8 bits)
Undefined Can’t use. (Dont change the data.)
0769 Real number 0.8 Can’t use. (Dont change the data.)
0770 Character Undefined File name of the sub cycle file using the automatic loading Max. 15
characters.
0771 Character Undefined Axis names and their order (Specify the axis names in the order
in which they are programmed on the NC. Example: XZCY)
0772 to
0776
0, 1
designation (8 bits)
Undefined Can’t use. (Dont change the data.)

Leave a Reply

Your email address will not be published. Required fields are marked *