Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
A. SETTING DATA,
SYSTEM PARAMETER, MTF
APPENDIX
855
Parameter
No.
Description
Initial
value
Format
1340 Integer 0 Specifies whether the Caxis is parallel to the X or Yaxis.
0 : Xaxis
1 : Y–axis
1341 Integer 0 Specifies the number of decimal places of data specified for the Caxis.
0 : That specified in the least input increment for the Xaxis in MTF 1030
1 : That specified in the least input increment for the Zaxis in MTF 1031
1342
0, 1 00000000
Can’t use. (Dont change the data.)
1343
designation (8 bit)
Can’t use. (Dont change the data.)
1344 to
1349
Integer 0 Can’t use. (Dont change the data.)
1350 Integer
(3 digit)
29 M code of the miscellaneous function for preparing for rigid tapping
1351 Integer 68 C–axis clamping M code
1352 Integer 69 C–axis unclamping M code
1353 Integer 1 Cutting along the X axis in the interpolation rigid tapping cycle
1354 Integer 2 Cutting along the Y axis in the interpolation rigid tapping cycle
1355 Integer 6 Tool calling M code
1360 Integer 83. Drilling cycle dwell off Front face
1376 Integer 85. Boring cycle Front face
1377 Integer 89. Boring cycle Side face
1380 Integer 107. Cylindrical interpolation start/cancel
1381 Integer 112. Polar coordinate interpolation start
1382 Integer 113. Polar coordinate interpolation cancel
1383 Integer 384 G code for an interpolation rigid tapping cycle
1384 Integer 380 G code for canceling an interpolation rigid tapping cycle
1385 Real number 68.1 G code for starting threedimensional coordinate conversion
1386 Real number 69.1 G code for canceling threedimensional coordinate conversion
1390 Integer 1 Output format of canned cycle R code
0 : absolute,
1 : incremental
1391 1
characters
K Canned cycle repetitive code
1392 2
characters
RR
II
Address specifying the difference in radius of the thread for a multiple thread
cutting cycle (High order: 5710, low order 5E00)
1393 2
characters
PP
KK
Address specifying the thread height for a multiple thread cutting cycle (High
order: 5710, low order 5E00)

Leave a Reply

Your email address will not be published. Required fields are marked *