Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
A. SETTING DATA,
SYSTEM PARAMETER, MTF
APPENDIX
865
(3)Detailed classification of function code
The detailed classification of function code is as follows:
(a) Special function
When the least significant 1 digit (major classification) is 0 ...
***0;
Most significant 3
digits (detailed
classification)
Least significant
1 digit (major
classification)
Function Remarks
0 0 0 0 No operation
other than
(= a)
0 0 Feed output Output a x 20 feeds
(b)Output of move command
When the least significant 1 digit (major classification) is 1 ...
***1;
Most significant
3 digits (detailed
classification)
Least significant
1 digit (major
classification)
Function Remarks
0 0 0 1 First axis output (Z axis) Address set to MTF 1040
1 1 0 1 Second axis output (X axis) Address set to MTF 1041
3 3 0 1 First auxiliary output
(circular center Z axis)
Address set to MTF 1042
4 4 0 1 Second auxiliary output
(circular center X axis)
Address set to MTF 1043
6 6 0 1 Screw lead output
(F code)
Address set to MTF 1044. However, if the setting
value of MTF 1092 is not exceeded, the output is
made with lead (E code)
7 7 0 1 High–precision screw lead
(E code)
Address set to MTF 1045
8 8 0 1 Dwell command output Address set to MTF 1046
9 9 0 1 Circular radius value output Address set to MTF 1047
A A 0 1 Third axis output Address set to MTF 1300
C C 0 1 Output of W0 Output is made only in the case of Z direction of
simultaneous 2 axes or simultaneous 1 axis in
approach and escape
D D 0 1 Output of U0 Output is made only in the case of X direction of
simultaneous 2 axes or simultaneous 1 axis in
approach and escape
E 1 0 1 Outputs the address specified in MTF 1392. Thread radius
E 2 0 1 Outputs the address specified in MTF 1393. Thread height
E 3 0 1 Outputs the address specified in MTF 1394. Depth of the first cut
E 4 0 1 Outputs the address specified in MTF 1397. Finishing allowance

Leave a Reply

Your email address will not be published. Required fields are marked *