Fanuc Symbol CAPi T Operators Manual

APPENDIX
B–63304EN/02
A. SETTING DATA,
SYSTEM PARAMETER, MTF
872
Most significant
3 digits (detailed
classification)
RemarksFunction
Least significant
1 digit (major
classification)
0 4 0 5 Coolant off M code output
(M09)
The M code of MTF 1134 is output. Also, the M08 and
M09 are modal managed and it is output only when
it is different from the modal value.
0 5 0 5 Program end M code
output (M30)
The M code set to the MTF 1135
0 6 0 5 Optional stop M code
output (M01)
The M code set to the MTF 1136
0 7 0 5 Subprogram call M code
output (M98)
The M code set to the MTF 1137
0 8 0 5 Subprogram return M code
output (M99)
The M code set to the MTF 1138
0 9 0 5 MTF 1139 (unused) Cautions) When “–1” is set to the MTF 1130 1139,
its M code is not output.
0 A 0 5 Tool calling M code M code specified in MTF1355
1 0 0 5 Milling machining M code
or turning machining M
code output
The M code set to the MTF 1315 and 1316. It is
selected by machining type.
1 1 0 5 Spindle stop M code output The M code set to the MTF 1132. It is output when the
milling machining is executed from the turning
machining or the turning machining is executed from
the milling machining.
1 2 0 5 Spindle indexing M code
output
The M code set to the MTF 1319
1 3 0 5 Orientation M code output The M code set to the MTF 1317
1 4 0 5 Spindle positioning release
M code output
The M code set to the MTF 1318
1 5 0 5 The M code set in MTF
1321 is output.
1 6 0 5 Outputs the C–axis
clamping M code (M68).
M code specified in MTF1351
1 7 0 5 Outputs the C–axis
unclamping M code (M69).
M code specified in MTF1352

Leave a Reply

Your email address will not be published. Required fields are marked *