Fanuc Symbol CAPi T Operators Manual

PROGRAMMING AND
OPERATION BY Symbolic FAPT
B–63304EN/02
3. EXECUTION OF
Symbolic FAPT
70
1) Type 1: Neck grinding
The meaning of each question is as follows.
a) DEFINE DERECTION DD = (0: PV ³ PH, 1: PH ³ PV). . .
Specifies the direction that defines the element. If the current point
is PV and the PH direction is to be defined (vertical plane ³
horizontal plane), input 0. Conversely, if the current point is PH
and the PV direction is to be defined (horizontal plane ³ vertical
plane) input 1.
b) END POINT P* EDX =. . . . . . . . .
EZ =
Inputting the end point value. If the define direction DD is 0, input
the PH point. If the define direction is 1, input the PV point.
c) WIDTH WT = (automatic setting)input neck width.. . . . . . . . . .
d) DEPTH DT = (automatic setting) input neck depth.. . . . . . . . . .
e) CORNER R R = (automatic setting) input the corner. . . . . . .
radius value.
The standard values of width, depth and corner R are set
automatically according to the diameter of the neck (PH point DX
value). To change these to other values, place the cursor on the
question and input the number.
f) SURFACE ROUGHNESS SR =. . . . .
Inputting the number of the
mark that displays surface
roughness. This surface roughness is appropriate to all the
elements that shape this figure. The standard setting value (value
of system parameter No.205) is set at the beginning automatically.
It is also possible to change to other values. By setting bit 1 of
system parameter No.10 to 1, it is possible to skip this question.
When it is skipped, the standard surface roughness setting value is
used.
The meaning of soft keys
“ESCAPE” Returns to the menu screen.. . . . . . . . . . . . . . . . . .
BACK PAGE Returns to the neck type. . . . . . . . . . . . . .
number selection screen.
“CURSOR °“CURSOR ± Moves cursor up and down.. . . .
“EXEC” Creates the figure based on the. . . . . . . . . . . . . . . . . . . .
data set.

Leave a Reply

Your email address will not be published. Required fields are marked *