Fanuc Symbol CAPi T Operators Manual

APPENDIX
B–63304EN/02
A. SETTING DATA,
SYSTEM PARAMETER, MTF
886
Point reference Descriptions
Parameter
No.
(6) Dwell 2050 Dwell command on opening chuck
(7) Linear move 2051 Shift command of work feed
G1 Z_ F_ ;
(8) Dwell 2052 Dwell command on closing chuck
(9) Linear move 2053 Shift command1 after work feed
G1 Z_ F_ ;
or
G1 X_ F_ ;
(10) Escape
2019 or
2033 and
2034
Shift command to tool exchange point Coolant off
Simultaneous 2 axes
Simultaneous 1 axis
Select the Simultaneous 2 axes or 1 axis depending on the
setting of bit 4 of system parameter No.107.
(11) Tool exchange point (end of process) 2041 End part of bar feed process
TXX00 ;
M1 ;
(12) Tool exchange point
Home position
2017 Shift to the home position
G0 X_ Z_ ;
(13) Home position (end of program) 2001 Trailer part
Spindle stop and tool offset cancel
Program stop and EOR

Leave a Reply

Your email address will not be published. Required fields are marked *