Fanuc Symbol CAPi T Operators Manual

APPENDIX
B–63304EN/02
A. SETTING DATA,
SYSTEM PARAMETER, MTF
888
Point referenced Descriptions
Parameter
No.
(4) Approach
2046 or
2047 and
2048
First movement from the tool exchange point Coolant on
Simultaneous 2 axes
Simultaneous 1 axis
Select the Simultaneous 2 axes or 1 axis depending on the
setting of bit 3 of system parameter No.107.
(5) Point referenced 2050 Dwell command when opening chuck
(6) Linear move 2051 Shift command to work feed
G1 Z_ F_ ;
(7) Dwell 2052 Dwell command when closing chuck
(8) Linear move 2054 Shift command after work feed 2
G0 Z_ ;
(9) Escape
2019 or
2033 and
2034
Shift command to tool exchange point Coolant off
Simultaneous 2 axes
Simultaneous 1 axis
Select the Simultaneous 2 axes or 1 axis depending on the
setting of bit 4 of system parameter No.107.
(10) Tool exchange point (end of process) 2041 End part of bar feed process
TXX00 ;
M1 ;
(11) Tool exchange point
Home position
2017 Shift to the home position
G0 X_ Z_ ;
(12) Home position (end of program) 2001 Trailer part
Spindle stop and tool offset cancel
Program stop and EOR

Leave a Reply

Your email address will not be published. Required fields are marked *