Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
A. SETTING DATA,
SYSTEM PARAMETER, MTF
APPENDIX
891
Point referenced
Parameter
No.
Descriptions
(1) Home position (start of program)
2000 Feed, EOR, and program number
2016 G50 X_ Z_ ;
(2) Home position
Tool exchange point
2017 Movement to the tool exchange point
G0 X_ Z_ ;
(3) Tool exchange point (start of process)
2200 Start part of process (NOTE 1)
2202 Coordinate system setting and tool selection
G50 X_ Z_ C_ S_ ;
G0 T_ ;
2024 Tool speed command
G97 S_ M?? ;
(4) Approach
First movement from the tool exchange point Coolant on
In the case of servo motor control system
2018 or
2031 and
2032
Simultaneous 3 axes
Simultaneous 2 axes, Simultaneous 1 axis
Select the Simultaneous 3 axes, 2 axes, or 1 axis depending on
the setting of bit 3 and 4 of system parameter numbers 300 to 304.
In the case of spindle positioning system
2031
2032
2211
Simultaneous 2 axes and Simultaneous 1 axis (CAUTION 1) and
(CAUTION 2)
Spindle identification command (NOTE 2)
CAUTION
1 Set the simultaneous 1 axis or simultaneous 2 axes (XZ
C).
2 Never set the function code of AA01 (Caxis shift
command).
NOTE
1 If the Caxis machining process has been defines
continuously, the second process and thereafter cannot be
referenced.
2 Perform the shift command of C–axis.

Leave a Reply

Your email address will not be published. Required fields are marked *