Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
A. SETTING DATA,
SYSTEM PARAMETER, MTF
APPENDIX
893
(Example) In the case of face milling
Point reference
Parameter
No.
Descriptions
(1) Home position (start of program)
2000 Feed, EOR, and program number
2016 G50 X_ Z_ ;
(2) Home position
Tool exchange point
2017 Movement to the tool exchange point
G0 X_ Z_ ;
(3) Tool exchange point (start of process)
2200 Start part of process (NOTE 1)
2202 Coordinate system setting and tool selection
G50 X_ Z_ C_ S_ ;
G0 T_ ;
2024 Spindle speed command
G97 S_ M?? ;
(4) Approach
2018 or
2031 and
2032
First move from the tool exchange point Coolant on
Simultaneous 3 axes
Simultaneous 2 axes, Simultaneous 1 axis
Select the Simultaneous 3 axes, 2 axes, or 1 axis depending on
the setting of bit 3 and 4 of system parameter No.304.
(5), (7), (10), and (12)
Linear move
2017 Rapid traverse and cutting feed (line) shift commands (NOTE 2)

Leave a Reply

Your email address will not be published. Required fields are marked *