Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
B. RESTRICTIONS ON EACH SYSTEMAPPENDIX
939
In menu 4 Machining Definition, press soft key “C–AXIS
MACHINING”.
1) Kind of Caxis machining specification
When “C–AXIS MACHINING button is pressed, the soft key for
selecting the kind of Caxis machining is displayed.
NOTE
For the spindle positioning method (MTF1306 = 1), the
FACE MILLING and CYLINDRICAL GROOVING software
keys are not displayed.
2) Tool data for Caxis machining
After setting the type of machining, the setting screen of tools to be
used is displayed.
Tool data and the tool picture are displayed respectively on the left and
right of the screen. (The tool picture is displayed if the optional
animation drawing function is available. To display the tool picture,
press the soft key “CHECK”.)
The following prompts will be displayed.
TURRET NO. TL = (NOTE 1). . . . . . . . . .
TOOL SELECT NO. TN =. . . .
TOOL OFFSET NO. TM =. . . .
TOOL ID NO. ID = (NOTE 2). . . . . . . . . .
B.1.3
Machining Definition of
C–axis Machining
B.1.3.1
Specification of C–axis
machining definition

Leave a Reply

Your email address will not be published. Required fields are marked *