PDF Fanuc Power Mate i-D/H Parameter Manual

B63180EN/02
4. DESCRIPTION OF PARAMETERS
103
3411 M code preventing buffering 1
3412 M code preventing buffering 2
3413 M code preventing buffering 3
LL
3420 M code preventing buffering 10
[Data type] Byte
[Valid data range] 0 to 255
Set M codes that prevent buffering the following blocks. If processing
directed by an M code must be performed by the machine without
buffering the following block, specify the M code.
M00, M01, M02, and M30 always prevent buffering even when they are
not specified in these parameters.

Leave a Reply

Your email address will not be published. Required fields are marked *