PDF Fanuc Power Mate i-D/H Parameter Manual

4. DESCRIPTION OF PARAMETERS
B63180EN/02
114
3735
Minimum clamp speed of the spindle motor
[Data type] Word
[Valid data range] 0 to 4095
Set the minimum clamp speed of the spindle motor.
Minimum clamp speed of the spindle motor
Set value =
× 4095
Maximum spindle motor speed
3736
Maximum clamp speed of the spindle motor
[Data type] Word
[Valid data range] 0 to 4095
Set the maximum clamp speed of the spindle motor.
Maximum clamp speed of the spindle motor
Set value =
× 4095
Maximum spindle motor speed
Spindle motor speed
Max. speed (4095, 10V)
Spindle motor max.
clamp speed
(Parameter No.3736)
Spindle motor minimum
clamp speed
(Parameter No.3735)
Spindle speed (S command)
Fig.4.17 (a) Maximum Clamp Speed of Spindle Motor
3740
Time elapsed prior to checking the spindle speed arrival signal
[Data type] Byte
[Unit of data] msec
[Valid data range] 0 to 225
Set the time elapsed from the execution of the S function up to the
checking of the spindle speed arrival signal.

Leave a Reply

Your email address will not be published. Required fields are marked *