PDF Fanuc Power Mate i-D/H Parameter Manual

4. DESCRIPTION OF PARAMETERS
B63180EN/02
116
3751
Spindle motor speed when switching from gear 1 to gear 2
3752
Spindle motor speed when switching from gear 2 to gear 3
[Data type] Word
[Valid data range] 0 to 4095
For gear switching method B, set the spindle motor speed when the gears
are switched.
Set value =
× 4095
Spindle motor speed when the gears are switched
Maximum spindle motor speed
Spindle motor max. clamp speed
Parameter No.3736
Parameter No.3752
Spindle speed
command
(S command)
Max. speed (4095, 10V)
Speed at gear 12 change point
Parameter No.3751
Spindle motor minimum clamp
speed
Parameter No.3735
Spindle motor speed
Gear 1
max.
speed
parameter
No.3741
Gear 2
max.
speed
parameter
No.3742
Gear 3
max
speed
parameter
No.3743
Gear 12
change point
(Parameter
No.3751)
Gear 23
change point
(Parameter
No.3752)
Speed at gear 23 change point
Fig.4.17 (c) Spindle Motor Speed at Gear 12/23 Change Point

Leave a Reply

Your email address will not be published. Required fields are marked *