PDF Fanuc Power Mate i-D/H Parameter Manual

B63180EN/02
4. DESCRIPTION OF PARAMETERS
7
4
DESCRIPTION OF PARAMETERS
Parameters are classified by data type as follows:
Table 4 Data Types and Valid Data Ranges of Parameters
Data type Valid data range Remarks
Bit
Bit axis
0 or 1
Byte
128 to 127 In some parameters, signs are
Byte axis
128 to 127
0 to 255
In some parameters, signs are
ignored.
Word
32768 to 32767 In some parameters, signs are
Word axis
32768 to 32767
0 to 65535
In some parameters, signs are
ignored.
2word
2word axis
99999999 to 99999999
NOTE
1 For the bit type and bit axis type parameters, a single data
number is assigned to 8 bits. Each bit has a different
meaning.
2 The axis type allows data to be set separately for each
control axis.
3 The valid data range for each data type indicates a general
range. The range varies according to the parameters. For
the valid data range of a specific parameter, see the
explanation of the parameter.
(1) Notation of bit type and bit axis type parameters
[Example]
#7
0000
#6 #5
SEQ
#4 #3 #2
INI
#1
ISO
#0
TVC
Data #0 to #7 are bit positions.
Data No.
(2) Notation of parameters other than bit type and bit axis type
1023 Servo axis number of a specific axis
Data.
Data No.

Leave a Reply

Your email address will not be published. Required fields are marked *