PDF Fanuc Power Mate i-D/H Parameter Manual

B63180EN/02
4. DESCRIPTION OF PARAMETERS
169
7210 PLSKY1
[Data type] Bit
[Valid data range] 1, 2, 3, 4, 6, 7, 8, 9
This parameter specifies a key value used with the + direction key for the
first jog feed axis on the software operators panel.
7211 MNSKY1
[Data type] Bit
[Valid data range] 1, 2, 3, 4, 6, 7, 8, 9
This parameter specifies a key value used with the direction key for the
first jog feed axis on the software operators panel.
7212 PLSKY2
[Data type] Bit
[Valid data range] 1, 2, 3, 4, 6, 7, 8, 9
This parameter specifies a key value used with the + direction key for the
second jog feed axis on the software operators panel.
7213 MNSKY2
[Data type] Bit
[Valid data range] 1, 2, 3, 4, 6, 7, 8, 9
This parameter specifies a key value used with the direction key for the
second jog feed axis on the software operators panel.
7214 PLSKY3
[Data type] Bit
[Valid data range] 1, 2, 3, 4, 6, 7, 8, 9
This parameter specifies a key value used with the + direction key for the
third jog feed axis on the software operators panel.
7215 MNSKY3
[Data type] Bit
[Valid data range] 1, 2, 3, 4, 6, 7, 8, 9
This parameter specifies a key value used with the direction key for the
third jog feed axis on the software operators panel.

Leave a Reply

Your email address will not be published. Required fields are marked *