PDF Fanuc Power Mate i-D/H Parameter Manual

4. DESCRIPTION OF PARAMETERS
B63180EN/02
196
8520 Axis corresponding to the first highspeed position switch
8521 Axis corresponding to the second highspeed position switch
8522 Axis corresponding to the third highspeed position switch
8523 Axis corresponding to the fourth highspeed position switch
8524 Axis corresponding to the fifth highspeed position switch
8525 Axis corresponding to the sixth highspeed position switch
8526 Axis corresponding to the seventh highspeed position switch
8527 Axis corresponding to the eighth highspeed position switch
8528 Axis corresponding to the ninth highspeed position switch
8529 Axis corresponding to the tenth highspeed position switch
8530 Axis corresponding to the tenth highspeed position switch
8531 Axis corresponding to the eleventh highspeed position switch
8532 Axis corresponding to the twelveth highspeed position switch
8533 Axis corresponding to the tirteenth highspeed position switch
8534 Axis corresponding to the fifteenth highspeed position switch
8535 Axis corresponding to the sixteenth highspeed position switch
[Data type] Byte
[Valid data range] 0,1,2,3,..., Number of controlled axes
These parameters specify the axis control numbers corresponding to the
first to sixteenth highspeed position switches.
Set 0 for the number corresponding to a highspeed position switch which
is not to be used.

Leave a Reply

Your email address will not be published. Required fields are marked *