PDF Fanuc Power Mate i-D/H Parameter Manual

4. DESCRIPTION OF PARAMETERS
B63180EN/02
202
D CRT_USR_MENU screen: Screen displayed when the [CUSTOM/
GRAPH] key is pressed three times.
These screens are switched each time the [CUSTOM] key is pressed.
However, the screen for which parameter is 0 is skipped.
NOTE
This parameter is invalid if a macro executor option is used.
8661 Variablearea size
[Data type] Word
[Unit of data] KByte
[Valid data range] 0 to 59
Specify the size of a static variable area that is sharable among tasks in
1 Kbyte units. The maximum size that can be specified is 59 Kbytes.
However, keep the sum of the SRAM Disk size and this value at or below
usable SRAM size 1 Kbytes (that is, 63 Kbytes).
NOTE
If the setting of this parameter is changed, the contents of the
variable area and SRAM Disk are initialized. The change is
put in effect next time the power is turned on.
8662 SRAM Disk size
[Data type] Word
[Unit of data] KByte
[Valid data range] 4 to 63
Specify the size of the SRAM Disk in 1 Kbyte units, using a value of 4
Kbytes or greater. The maximum size that can be specified is 63 Kbytes.
However, keep the sum of the variablearea size and this value at or below
(usable SRAM size 1) Kbytes (that is, 63 Kbytes).
NOTE
If the setting of this parameter is changed, the contents of the
variable area and SRAM Disk are initialized. The change is
put in effect next time the power is turned on.
8663 Time zone setting
[Data type] Twoword
[Unit of data] Second
[Valid data range] 12 3600 to 12 3600
Specify the time difference between the Japan standard time and the
Greenwich Mean Time in second units. The time difference is 9 hours.
(Setting value : 9 3600 = 32400)

Leave a Reply

Your email address will not be published. Required fields are marked *