PDF Fanuc Power Mate i-D/H Parameter Manual

4. DESCRIPTION OF PARAMETERS
B63180EN/02
206
8760 Program number for registering data for slaves (I/O Linkbased data input/out-
put function)
[Data type] Word
[Valid data range] 0 to 9999
Set the program number of a program for registering data (parameters,
macro variables, and diagnose (PMC) data) from slaves by the I/O
Linkbased data input/output function.
Use a program number determined by:
Parameter for slaves in group n: Setting + n 10 + 0
Macro variable for slaves in group n: Setting + n 10 + 1
Diagnose (PMC) data for slaves in group n: Setting + n 10 + 2
(Example) If the parameter is set to 8000:
[Program number] [Type of data saved as program]
8000: Parameter in group 0 (I/O CHANNEL = 20)
8001: Macro variable in group 0 (I/O CHANNEL = 20)
8002: Diagnose (PMC) data in group 0 (I/O CHANNEL = 20)
8010: Parameter in group 1 (I/O CHANNEL = 21)
8011: Macro variable in group 1 (I/O CHANNEL = 21)
8012: Diagnose (PMC) data in group 1 (I/O CHANNEL = 21)
8020: Parameter in group 2 (I/O CHANNEL = 22)
8021: Macro variable in group 2 (I/O CHANNEL = 22)
8022: Diagnose (PMC) data in group 2 (I/O CHANNEL = 22)
::
::
::
8050: Parameter in group 15 (I/O CHANNEL = 35)
8051: Macro variable in group 15 (I/O CHANNEL = 35)
8052: Diagnose (PMC) data in group 15 (I/O CHANNEL = 35)

Leave a Reply

Your email address will not be published. Required fields are marked *