PDF Fanuc Power Mate i-D/H Parameter Manual

Add the following explanation to the next of parameter No.3170 in the chapter “4.11
PARAMETERS OF MDI,DISPLAY, AND EDIT” of “4. DESCRIPTION OF PARAMETERS”
#7 #6 #5 #4 #3 #2 #1 #0
3195
RENM1
CHGCS
[Data type] Bit
CHGCS When the virtual-key of the LCD unit with touch panel is used,
the screen switching to the application of the FANUC
PICTURE which is defined by the following symbol is
operated by [GRPH] key.
In this case, the screen number is decided by the following list.
Symbol Soft key number
CRT_USR_AUX 0x0105 USER (small key)-AUX
CRT_USR_MCR 0x0205 USER (small key)-MACRO
CRT_USR_MENU 0x0305 USER (small key)-MENU
operated by [CUST] key.
In this case, the screen number is decided by the following list.
Symbol Soft key number
CRT_CST_AUX 0x0106 CRT_CST_AUX (full key)-AUX
CRT_CST_MCR 0x0206 CRT_CST_MCR (full key)-MACRO
CRT_CST_MENU 0x0306 CRT_CST_MENU (full key)-MENU
RENM1 When the “GRPH” is selected as the key to switch to the application
screen of FANUC PICTURE, the key top display is
0 “GRPH”.
1 “OPER”.
B-63180EN/02-5
2/3
EDIT
DATE DESIG. DESCRIPTION
FANUC Power Mate i-MODEL D/H
The assignment of the virtual-key to switch to FANUC
PICTURE screen when the LCD unit with touch panel is used
TITLE
DRAW.NO. CUST.
SHEET
01 02.05.06
Newly added
(NOTE)
Set “0” to the parameter 3195#0 when the CRT/MDI or separated type MDI is used.
And, set the following screen number when the screen switching to FANUC PICTURE
screen is operated by the “CUST/GRPH” key of CRT/MDI or separated type MDI.
Symbol Soft key number
CRT_USR_AUX 0x0105 USER (small key)-AUX
CRT_USR_MCR 0x0205 USER (small key)-MACRO
CRT_USR_MENU 0x0305 USER (small key)-MENU

Leave a Reply

Your email address will not be published. Required fields are marked *