PDF Fanuc Power Mate i-D/H Parameter Manual

B-63180EN/02-10
2 / 2 EDIT
DATE DESIG. DESCRIPTION
FANUC Power Mate i - MODEL D/H
Machine Remote Diagnosis function
TITLE
DRAW.NO.
CUST.
SHEET
Please add the following explanations in chapter of “4.5 PARAMETERS OF ETHERNET.
Parameters for Machine Remote Diagnosis
No
0931 Special Character (No.1)
0932 Special Character (No.2)
0933 Special Character (No.3)
0934 Special Character (No.4)
0935 Special Character (No.5)
[Data type] Byte
[Valid data range] 32 to 126
These parameters are used for entering special characters that are needed to
display in “INQUIRY 1,2,3” of Machine Remote Diagnosis.
These parameters enable characters, that cannot be input by MDI keys, to be input
by using soft key.
When non-zero values are set to these parameters, [CHAR-1] to [CHAR-5] are
displayed as the special character input soft key.
Example: When “33” is set to parameter No.931, a “!” is input by pressing soft key
[CHAR-1].

Leave a Reply

Your email address will not be published. Required fields are marked *