PDF Fanuc Power Mate i-D/H Parameter Manual

B63180EN/02
4. DESCRIPTION OF PARAMETERS
87
#7
3100
#6 #5 #4 #3 #2 #1
CEM
#0
[Data type] Bit
CEM On screens such as the operation history screen and help screen, keys on
the MDI panel are indicated:
0 : In English.
1 : With graphics qualifying for CE marking. (A character generator
supporting graphics qualifying for CE marking is required.)
#7
3101
#6 #5 #4
BGD
#3 #2 #1 #0
[Data type] Bit
BGD In background editing, a program currently selected in the foreground:
0 : Cannot be selected. (BP/S alarm No.140 is issued disabling
selection.)
1 : Can be selected. (However, the program cannot be edited, only
displayed.)
#7
3102
#6
SPN
#5 #4
ITA
#3 #2
FRN
#1
GRM
#0
JPN
NOTE
When this parameter is set, the power must be turned off
before operation is confinued.
[Data type] Bit
These bits select the language to be used for the display.
SPN ITA FRN GRM JPN Language
0 0 0 0 0 English
0 0 0 0 1 Japanese
0 0 0 1 0 German (optional)
0 0 1 0 0 French (optional)
0 1 0 0 0 Italian (optional)
1 0 0 0 0 Spanish (optional)
#7
3104
#6
DAL
#5 #4
DRL
#3
PPD
#2 #1 #0
MCN
[Data type] Bit
MCN Machine position
0 : Not displayed according to the unit of input.
(Regardless of whether input is made in mm or inches, the machine
position is displayed in mm for millimeter machines, or in inches for
inch machines.)
1 : Displayed according to the unit of input.
(When input is made in mm, the machine position is displayed in mm,
and when input is made in inches, the machine position is displayed in
inches accordingly.)
4.14
PARAMETERS OF
MDI, DISPLAY,
AND EDIT

Leave a Reply

Your email address will not be published. Required fields are marked *