Contents Summary of Series 16i/18i-PB, Level up for Safety Zone Check, Specifications Additional Manual
Page 1FANUC Series 16i/18i-PB Level up for Safety Zone Check Specifications Contents 1. Addition of Safety Zone Check – Type A 2 2. Ignore Safety Zone Check Signal 2 3. Addition of Round tool zone 2 4. Additional parameters 3 5. Additional signal 4 Title FANUC Series 16i/18i-PB of Level up for Safety Zone
Page 21. Addition of Safety Zone Check-Type A At present, in case of “punch forbidden area“ type safety zone, the CNC issues an alarm before movement if the punch position is in the punch forbidden area. But the following functions are available to set the parameter No.16504#0 (SPA) =1. • The CNC issues a
Page 3Round Tool Zone For X value of Tool Area Parameter Safety Zone No Alarm Work Clamp 4. Additional Parameters #7 #6 #5 #4 #3 #2 #1 #0 16504 RTZ SPA Data Type: Bit SPA In case of safety zone check type-A, when the end of positioning command (no punch positioning) is in the punch forbidden area, or the
Page 45. Additional Signal Ignore safety zone check signal SAFNG [Classification] Input signal [Function] During this signal is set to “1”, the safety zone check is ignored. [Signal address] #7 #6 #5 #4 #3 #2 #1 #0 G239 SAFNG Title FANUC Series 16i/18i-PB of Level up for Safety Zone Check Drawi S