1. Fanuc
  2. Access to P-Code Variables through Custom Macro function

Access to P-Code Variables through Custom Macro function Additional Manual Page 1

Additional Manual
1
Edit
A
pprvDesig.
Sheet
Title
Draw
No.
／
3
Date
Desig
Descri
p
tion
Date
FANUC Series16i /18i /21i-TA
A
ccess to P-Code Variables through
Custom Macro function.
A-76389E
2000.05.16
T.Saitoh
S.Isohata
FANUC Series 16i /18i /21i –MA / TA
Specification
Access to P-Code Variables through
Custom Macro function
Previous page
Next page

Contents Summary of Access to P-Code Variables through Custom Macro function Additional Manual

  • Page 1FANUC Series 16i /18i /21i –MA / TA Specification Access to P-Code Variables through Custom Macro function FANUC Series16i /18i /21i-TA Title Access to P-Code Variables through Custom Macro function. Draw No. A-76389E Edit Date Desig Description Sheet 1／3 Date 2000.05.16 Desig. T.Saitoh Apprv S.Isoh
  • Page 21. Outline This function enables Custom Macro function to read from or to write into P-code Variables for Macro Executor. 2. Specification In the Custom Macro function, P-Code Variables(#10000~) or expanded P-Code Variables(#20000~) can be read out or write into after Parameter No.8570=1. Otherwise
  • Page 32.2 Notice (1) When power ON, the value of #8570=0, and value, 0 or 1, of this parameter is not changed by RESET operation. (2) The area of P-Code variables and expanded P-Code variables are decided by compile parameter No.9037,9044 of Macro Executor. (3) P-code variable number which can be read or